Lenovo ThinkStation P500 Configuration Manual page 22

How to create and configure raid arrays

Hide thumbs Also See for ThinkStation P500:

UEFI BIOS Method (HII Interface) – Setting up a RAID Array

Use this method to create a basic RAID array using the Avago MegaRAID SAS/SATA FLEX RAID Adapter or

Avago 9364-8i adapter with the system BIOS set to UEFI mode.

1. Install the desired drives and Avago controller into the system (see "P500-P700-P900 RAID

Hardware Configuration" document for installation instructions).

2. After ensuring system BIOS is in UEFI mode, boot the system and enter the BIOS setup menu by

pressing the F1 key during system boot.

3. Using the arrow keys, select the "Advanced" tab

4. Using the arrow keys, highlight the selection for "Avago MegaRAID Configuration Utility", and

press Enter.