Lenovo ThinkStation P500 Configuration Manual page 12
How to create and
configure raid arrays
Hide thumbs
Also See for ThinkStation P500:
- Hardware maintenance manual (220 pages) ,
- User manual (190 pages) ,
- Manual (182 pages)
Advertisement
15. When done, use the up and down arrow keys to select the strip size and/or capacity. Press
ENTER to input the value and then press ENTER again when done.
16. When all values are set appropriately, use the up and down arrow keys to select "Create
Volume" and press ENTER to create the array.
The user will then be returned to the RSTe menu. The newly created array is now listed in the
menu.
17. Save and exit BIOS setup when finished.
Advertisement
