Lenovo ThinkStation P500 Configuration Manual page 21

***Note: If "Make JBOD" option is grayed out and not selectable, download the Avago
MegaRAID utility from the Avago website (www.avagotech.com). Run the following dos
command to enable JBOD mode: megacli –adpsetprop –enablejbod -1 –a0
5. Notice the state of each drive will change from "UG" to "JBOD".
6. Press Ctrl-N three more times to go back to the "VD Mgmt" main menu option in which all
drives in JBOD mode should be listed.