Foscam FI9928P User Manual page 41

1. Click the SSID of your router and
the relevant information will be filled
in the fields automatically.
Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable.
Never shut down the power of the camera until the IP camera is able to connect to the wireless network.
The LAN IP address will disappear on the window of Equipment Search Tool when the camera is configuring a
wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of
the camera will show again on the window of the Equipment Search Tool. The IP address may have changed
after the camera receives a wireless connection; we recommend setting a static local IP address if this IP
address changes by right clicking the camera in Equipment Search Tools, setting a static IP, and pushing OK.
Congratulations! You have set up the wireless connection of the camera successfully.
NOTE:
If you fail to make a wireless connection, please refer to your seller or contact us directly for
assistance.
4.3.3 DDNS
If you need Foscam DDNS, you can apply it on DDNS page.
First Enable DDNS, then select "myfoscam.org" from DDNS Server list, click "Get My DDNS Now".
2. Enter the password of your router.
3 Click Test to check if the
password is correct or not.
39