Foscam FI9928P User Manual page 24

If you have added time and camera name in the video, you can see it in the live window.
Go to Settings > Basic Settings > Camera Name panel, and you can change another device name. The
default device name is anonymous.
Go to Settings > Basic Settings > Camera Time panel and adjust the device time.
Go to Settings > Video > On Screen Display panel, you can add OSD or not.
Section 10 Play / Stop / Talk / Audio / Snap / Record / Full Screen Button
6
7
8
1 3
5
2
4
1----- Play Click it to play the video of the camera
2----- Stop Click it to stop the video of the camera
3----- Talk Click the button and the icon will become to , then talk to the microphone that connected
with PC, people around the camera can here your voice. Click the icon again and stop talking.
4----- Audio Click this icon, the icon will become to you can hear the sound around the camera by the
earphone or speakers that connected with PC.
5----- Volume Click it to open the volume control.
6----- Snapshot Click it to make snapshot and it pop-up a window which picture you snapshot, right click in
the window and save the picture to anywhere you want.
7----- Record Click the icon and the camera start recording, you can see a green dot in the live
window. Click again and stop recording. The default storage path is C:\IPCamRecord. You can change the
storage path: Go to Settings > Record > Storage Location.
8----- Full Screen Click it to make full-screen, or you can double click the surveillance screen to make
full-screen. Double click again and exit full-screen.
Onscreen Mouse Control
Right click the mouse and you can adjust the screen ration, full screen and Zoom up.
22