Table of Contents
Advertisement
Recording/Playback
Taking Still Images in Intelligent Auto Mode
You can record without worrying about the
setting details by using the Intelligent Auto
mode.
Before recording an important scene, it is
recommended to conduct a trial recording.
Press the M button to turn on the
1
power.
Press the A/B button to select the
2
still image mode.
.
3
Set the recording dial to "i.AUTO".
.
Press the SNAPSHOT button
4
halfway.
Press halfway
.
5
Press the SNAPSHOT button fully.
PHOTO lights up when a still image is
0
being captured.
To check the captured still image
0
immediately, press and hold the
SNAPSHOT button.
MENU
Memo
To return to the recording mode
0
from the playback mode, press the
SNAPSHOT button during still
image playback.
This unit turns on immediately if the
0
power button is pressed within 5
minutes after the power is turned
off. (when "QUICK RESTART" is
set to "HIGH SPEED 2")
When "AUTO POWER OFF" is set
0
to "ON", this unit turns itself off
automatically to conserve power
when it is not operated for 5
minutes. (only when using the
battery pack)
Zooming
The angle of view can be adjusted using
zoom.
Use the W end (wide angle end) to shoot
0
a wider field of view.
Use the T end (telephoto end) to
0
magnify the subject for shooting.
Wide Angle
Memo
The following zoom options are
0
available:
- Optical Zoom (1 - 10x)
Only optical zoom is available in the
0
still image recording mode.
Telephoto
17
Advertisement
Table of Contents
