Table of Contents
Advertisement
The remaining battery
display is not correct.
The LCD monitor is
difficult to see.
No date/time display.
Sound or video is
interrupted.
Cannot find a recorded
file.
Mosaic-type noise
occurs when recording
scenes with fast
movements or extreme
changes in brightness.
The unit operates slowly
when switching
between video mode
and still image mode, or
when switching the
power on or off.
When connected to the
TV via the HDMI mini
cable, proper images
and sounds are not
output.
64
Fully charge and fully discharge the
0
battery pack, then recharge it again.
Remaining battery power is not
0
displayed when the AC adapter is
connected.
If this unit is used for long periods of time
0
in high or low temperatures, or if the
battery pack is repeatedly charged, the
amount of remaining battery may not be
displayed correctly.
The LCD monitor may be difficult to see
0
if used in bright areas such as under
direct sunlight.
Set "MONITOR BRIGHTNESS" in the
0
"COMMON" menu to "4".
When playing back on a TV, set
0
"DISPLAY ON TV" in the "COMMON"
menu to "ON".
Sometimes playback is interrupted at
0
the connecting section between two
scenes. This is not a malfunction.
Change the playback media by tapping
0
I/G on the index screen.
(Files on the other media will not be
displayed.)
Change the video quality for recording
0
if "iFrame" is used.
It is recommended that you copy all
0
videos and still images onto your
computer, and erase the files from this
unit. (If there are many recorded files on
this unit, it takes time for the unit to
respond.)
Images and sounds may not be output
0
properly depending on the TV
connected. In such cases, perform the
following operations.
- Disconnect the HDMI mini cable and
connect it again.
- Turn off and on this unit again.
-
-
-
-
59
60
-
27, 29
54
-
38
Advertisement
Table of Contents
