Taking Still Images In Intelligent Auto Mode - JVC GC-PX10U Basic User's Manual

Recording/Playback

Taking Still Images in Intelligent Auto Mode

You can record without worrying about the
setting details by using the Intelligent Auto
mode.
Before recording an important scene, it is
recommended to conduct a trial recording.
Press the M button to turn on the
1
power.
Press the A/B button to select the
2
still image mode.
.
3
Set the recording dial to "i.AUTO".
.
Press the SNAPSHOT button
4
halfway.
Press halfway
.
5
Press the SNAPSHOT button fully.
PHOTO lights up when a still image is
being captured.
To check the captured still image
immediately, press and hold the
SNAPSHOT button.
8
MENU
Zooming
The angle of view can be adjusted using
zoom.
Memo
To return to the recording mode from
the playback mode, press the
SNAPSHOT button during still image
playback.
This unit turns on immediately if the
power button is pressed within 5
minutes after the power is turned off.
(when "QUICK RESTART" is set to
"HIGH SPEED 2")
When "AUTO POWER OFF" is set to
"ON", this unit turns itself off
automatically to conserve power
when it is not operated for 5 minutes.
(only when using the battery pack)
Use the W end (wide angle end) to shoot
a wider field of view.
Use the T end (telephoto end) to magnify
the subject for shooting.
Wide Angle
Memo
The following zoom options are
available:
Optical Zoom (1 10x)
Only optical zoom is available in the
still image recording mode.
Telephoto