Table of Contents
Advertisement
Setting
(Position of Recording
Dial)
GAIN
(M, S, A, P)
DIS
AUTO REC
GRID
(linked to video mode)
USER DIAL
GAUTO: Adjusts the ISO level automatically according to the
brightness of the subject.
oISO100: Uses a sensitivity equivalent to ISO100 film
pISO200: Uses a sensitivity equivalent to ISO200 film
qISO400: Uses a sensitivity equivalent to ISO400 film
sISO800: Uses a sensitivity equivalent to ISO800 film
tISO1600: Uses a sensitivity equivalent to ISO1600 film
uISO3200: Uses a sensitivity equivalent to ISO3200 film
vISO6400: Uses a sensitivity equivalent to ISO6400 film
The flash cannot be used when "ISO6400" is set.
0
The higher the ISO level, the grainier the image becomes
0
due to noise.
0OFF: Deactivates image stabilizer.
1ON: Reduces camera shake under normal shooting
conditions.
Image stabilization starts when the SNAPSHOT button is
0
pressed halfway.
It is recommended to set the image stabilizer to "OFF"
0
when shooting a subject of little movement with the unit on
a tripod.
Complete stabilization may not be possible if camera
0
shake is excessive.
fOFF: Deactivates the function.
wRECORD ONE SHOT: Records automatically by detecting
the subject.
xCONTINUOUS SHOOTING: Performs continuous
shooting for 3 seconds about 1 second before the subject is
detected. (fixed at medium speed)
Recording starts each time a subject is detected.
0
A frame appears on the screen, and the subject is detected
0
based on the changes in brightness within the frame. As
such, recording may also start due to changes in
brightness that are not caused by the subject (reflection of
light, etc.).
Digital zoom, self-timer, and image stabilizer are not
0
available. Shutter speed, aperture, and brightness cannot
be adjusted.
fOFF: Turns off grid display.
eON: Displays gridlines to make it easier to detect when the
subject appears slanted.
Hold this unit such that the subject is parallel to the grid so
0
that it can be recorded without appearing slanted.
The grid will not be recorded.
0
Saves the settings of shutter speed, aperture, white balance,
and gain so that recording can be performed with the same
values by simply setting the recording dial to "U". (p. 37)
Details
53
Advertisement
Table of Contents
