Table of Contents
Advertisement
Setting
(Position of Recording
Dial)
TIME-LAPSE
RECORDING
AUTO REC
WIND CUT
GRID
(linked to still image mode)
USER DIAL
56
fOFF: Deactivates the function.
A1SEC INTERVAL: Takes a frame at 1-second intervals.
B5SEC INTERVAL: Takes a frame at 5-second intervals.
C40SEC INTERVAL: Takes a frame at 40-second intervals.
During time-lapse recording, video quality is set to "HD
0
1080/60p(UHR)" temporarily.
This function enables the changes of a scene that occur
0
slowly over a long period to be shown within a short time by
taking frames of it at a certain interval.
Audio sound cannot be recorded and zooming is not
0
available.
When recording is stopped with the recorded time less than
0
"0:00:00:17", the video will not be saved.
Recording stops automatically 99 hours after it is started.
0
Make use of a tripod and AC adapter for time-lapse
0
recordings with long intervals.
fOFF: Deactivates the function.
eON: Records automatically by detecting the subject.
Recording starts each time a subject is detected.
0
A frame appears on the screen, and the subject is detected
0
based on the changes in brightness within the frame. As
such, recording may also start due to changes in brightness
that are not caused by the subject (reflection of light, etc.).
Digital zoom, image stabilizer, high-speed recording, and
0
time-lapse recording are not available. Shutter speed,
aperture, and brightness cannot be adjusted.
fOFF: Deactivates the function.
eON: Reduces the noise caused by wind.
For details, refer to "GRID" in the recording menu (still image).
(p. 53)
Saves the settings of shutter speed, aperture, white balance,
and gain up so that recording can be performed with the same
values by simply setting the recording dial to "U". (p. 37)
Details
Advertisement
Table of Contents
