Block Diagram 1S; Connections And Terminal Strips 1S - AEG THYRO-S 1S*H 1 Series Operating Instructions Manual

4.5 Block diagram 1S...H 1
Fig. 1 Block diagram
70
4.6 Connections and terminal strips 1S...H 1
This chapter describes all existing terminal strips and plug connec-
tions.
Fig. 2 Terminal plan 1S...H 1
System interface
Earth
RxD / connection to bus module
TxD / connection to bus module
Bus module recognition
Earth
Pos. power supply unstabilised (usable as source for terminal 1)
Control signal (On > 3V)
L2 / N mains connection – synchronisation voltage mains frequency RM 3.5
L2 / N mains connection – synchronisation voltage mains frequency RM 3.5
Fig. 3 Operation 1S...H1
H 100
LED
H 230
LED
H 250
LED
S1- 4 Without function
S1- 3
Thyro-Tool Family Mode
S1- 2
Operating mode
S1- 1
Operating mode
In the block diagram the functions of type H1 are shown.
The central control element is a e -controller.
RM 3,5
GREEN ON
GREEN Diagnosis
RED Load Fault
chapter 3.1
71
EN