Safety Regulations - AEG THYRO-S 1S*H 1 Series Operating Instructions Manual

List of illustrations and tables
Fig. 1 Block diagram 1S...H1
Fig. 2 Terminal plan 1S...H1
Fig. 3 Operation 1S...H 1
Fig. 4 Block diagram 1S...H RL1
Fig. 5 Terminal plan 1S...H RL1
Fig. 6 Operation Thyro 1S...H RL 1
Fig. 7 User surface Thyro-Tool Family
Fig. 8 Connecting diagram Thyro-S 1S...H 1
Fig. 9 Connecting diagram 2x Thyro-S 1S...H 1
Fig. 10 Connecting diagram Thyro-S 1S...H RL 1
Fig. 11 Connecting diagram 2x Thyro-S 1S...H RL 1
Tab. 1 Load monitoring
Tab. 2 LED signals Thyro-S
52

Safety regulations

Important instructions and explanations
The skilled personnel assembling and disassembling the devices,
70
commissioning them and maintaining them must know and observe
71
these safety regulations.
71
72
73
74
76
78
79
80
81
64
67
ACCIDENT PREVENTION RULES
It is imperative that the accident prevention rules of the country of
application and the generally applicable safety regulations are obser-
ved.
CAUTION
This instruction indicates work and operating procedures
to be observed exactly to exclude hazards to persons.
ATTENTION
This instruction refers to work and operating procedures
to be observed exactly to avoid damage or destruction of
Thyro-S or parts thereof.
REMARK
This is where remarks on technical requirements and
additional information is given which the user must ob-
serve.
CAUTION
Before commencing any work on Thyro-S, the following
safety regulations must be observed:
• switch voltage-free
• secure against switching on
• determine voltage-free state
• ground and short-circuit device
• cover or block neighbouring parts under voltage.
53
EN