Settings Of Different Wire Welding Ways - Magnum CARIMIG 202LCD Manual

Operating Instructions and Parts Manual
-Do not touch cylinder with MIG gun.
-Do not weld on the cylinder.
-Always secure cylinder upright to a cart or stationary object.
-Keep cylinders away from welding or electrical circuits.
-Use the proper regulators, gas hose and fittings for the specific application.
When MIG (solid) wires are used, the shielding gas is required.

Settings of different wire welding ways

6.1
6.1.1 Change the welding mode to the MIG welding mode;
6.1.2 While during the solid core with gas shield welding and the flux-cored welding, the
patch-plug from the machine insert in the positive polarity output socket of the machine,
and the ground cable connect to the negative polarity;
6.1.3 While using the self-shield without gas during the welding, the patch-plug from the
machine insert in the negative polarity output socket of the machine, and the ground cable
connect to the positive polarity;
With gas shied welding output line-connection
without gas shield welding
11
MIG/MMA WELDER