Furuno FS-5070 Installation Manual page 21

Printer PP-510
Install the unit with the two mounting fixtures (supplied). Refer to the outline drawing at the end
of this manual. Connect the interconnection cable between the printer and the transceiver unit
(or printer interface kit IF-8500). For how to load paper and set ribbon cassette, refer to the
Operator's Manual of the printer.
Mounting
Fix the printer to the mounting location with two mounting fixtures.
Mounting Fixture (2)
Mounting Fixture (1)
200
405
Dimensions of printer PP-510
Printer interface
Referring to the outline drawing at the end of this manual, fix the printer interface with tapping
screws (local supply) to tabletop or bulkhead.
92
70+0.5
5 Fixing holes
1-13