Table of Contents
Advertisement
Quick Links
TURBO HD
TVI Bullet Camera
User Manual
UD04876B
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the model listed below.
Type
Type I
Type II
This manual may contain several technically incorrect
places or printing errors, and the content is subject to
change without notice. The updates will be added to the
new version of this manual. We will readily improve or
update the products or procedures described in the
manual.
Model
DS-2CE16D0T-WL3
DS-2CE16D0T-WL5
0100001070302
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HIKVISION DS-2CE16D0T-WL3
Summary of Contents for HIKVISION DS-2CE16D0T-WL3
-
Page 1: User Manual
This manual applies to the model listed below. Type Model Type I DS-2CE16D0T-WL3 Type II DS-2CE16D0T-WL5 This manual may contain several technically incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual. -
Page 2: Regulatory Information
Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. - Page 3 Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected.
- Page 4 While in delivery, the camera shall be packed in its original packing, or packing of the same texture.
-
Page 5: Product Features
Auto white balance Auto electronic shutter Auto gain control (AGC) White supplement light Up the Coax (HIKVISION-C) Overview 1.2.1 Type I Camera Overview Sun Shield Switch Cable TVI Video Cable Power Cord (12 VDC ) -
Page 6: Wall Mounting
disassemble the camera for repair or maintenance by yourself. Note: Since type I camera and type II camera share the same installation method, we take type I camera as the example to describe the installation. Wall Mounting Before you start: The package contains the wall mounting bracket. - Page 7 Tilt Position: 0° to 90° Vertical Adjusting Screw Pan Position: 0° to 360° Horizontal Adjusting Screw Figure 2. 3 Angle Adjustment Pendant Mounting Before you start: You need to purchase a pendant bracket first. Steps: 1. Attach the bracket to the ceiling. 2.
- Page 8 Figure 2. 6 Fix the Camera to the Bracket 7. Route the cables and connect the corresponding power cord and video cable. 8. Power on the camera to check whether the image on the monitor is gotten from the optimum angle. If not, adjust the camera according to the figure below to get an optimum angle.
Need help?
Do you have a question about the DS-2CE16D0T-WL3 and is the answer not in the manual?
Questions and answers