Battery
Standard Charge
The standard charge connection allows to power two cradles with
one power supply.
To connect a second cradle use the JOYA TOUCH Cradle Power
Jumper, available as optional accessory (P/N 91ACC0049).
1. Connect the first cradle to the second cradle using the power
jumper.
2. Connect the power supply to the first cradle.
3. Plug the power supply into the AC/DC plug using a Datalogic
power cable.
For further information on the JOYA TOUCH 3-Slot Cradle,
refer to the JOYA TOUCH 3-Slot Cradle Quick Start Guide,
included in the cradle's box, and to the JOYA TOUCH 3-Slot
Cradle Installation Guide, downloadable from our website
NOTE
www.datalogic.com.
By default, the main battery pack is disconnected at the factory to
avoid damage due to excessive draining.
Rechargeable battery pack is less than half of full charge when
delivered.
14
JOYA™ TOUCH