Cold Boot; Clean Boot - Datalogic Joya User Manual

Use and Functioning

Cold Boot

A cold boot is a complete reset of the JOYA TOUCH in which all
applications are forcibly closed and RAM is completely cleared.
Registry is restored from persistent memory if a saved copy is
available (see Persistent Registry on page 52) and RAM file system
completely erased. You will lose any applications and data (registry
too) which are not stored in persistent flash memory.
A cold boot is necessary when the Windows Embedded Compact 7
operating system locks up and the warm boot command does not
work.
To perform a cold boot, lightly press with a metallic clip inside the
circle hole on the back for 10 seconds.

Clean Boot

A clean boot is a complete restore to factory default and backup
folder content erase of the JOYA TOUCH. You will loose any
applications and data (registry too).
To perform a clean boot first execute a cold boot while keeping
pressed the Home key.
A pop-up will ask you to confirm, confirm by pressing and releasing
the Home key for three times, or wait for 3 seconds to cancel.
User's Manual 29