Datalogic Joya User Manual page 61

• Disabled
The radio is disabled. To enable the radio, check the Wi-Fi
check box located on the Configuration window. When the
radio is disabled, it does not attempt to make a connection to
an access point.
• Not Associated
The radio has not established a connection to an access point.
• Associated
The radio has established a connection to an access point but
is not EAP authenticated. The radio cannot communicate
unless it is associated and EAP authenticated.
If the Encryption type is set to WEP or Open (None), it can
communicate (send data) while in the Associated state.
NOTE
• Connected to [SSID]
The radio is connected to the named SSID.
IP Address
Displays the IP address of the Wi-Fi device.
Signal Strength
Displays the signal strength (or RSSI) in dBm.
User's Manual
Use and Functioning
55