Calling A Single Station (Individual Call) - Uniden UM385 Owner's Manual

To call a single station with DSC, follow the steps below:

Calling a single station (Individual Call)

1. Press CALL-MENU to display the call menu.
2. Select Individual.
3. The radio displays the names listed in your directory; use CHANNEL UP and
CHANNEL DOWN to choose the directory entry you want to call and press ENT-
1W/25W. If you want to call a station that is not in your directory, select Manual.
The radio prompts you to enter the MMSI number you want to call. Enter the MMSI
number the same way you enter directory entries (see page 22) Enter all nine
digits and press ENT-1W/25W.
4. The radio prompts you to select a response channel. Use CHANNEL UP and CHANNEL
DOWN to scroll through the available channels. When you reach the channel you
want to use for a response, press the ENT-1W/25W button.
5. The radio displays the MMSI number you are about to call and asks you to confirm.
If you want to call the displayed MMSI number, select Send. To cancel the call, select
6. The radio automatically switches to channel 70 to transmit the call request.
Cancel.
x When the other station accepts the call, both radios switch to the selected response
channel for voice transmission.
x If the other station cannot respond on the channel you selected, the radio displays Not
support CH.
19