Selecting A Standard Display - Sennheiser SKP 100 G3 Instruction Manual

Using the plug-on transmitter
The current state of the muting function or the RF signal is displayed on
the display panel of the plug-on transmitter:
533.875
ew100 G3
P
MUTE
AF
Audio signal is muted
Transmitter's display panel:
Audio signal is activated (muting is canceled)
Transmitter's display panel:
RF signal is deactivated
Transmitter's display panel:
RF signal is activated
Transmitter's display panel:
You can also deactivate the RF signal on switch-on. For more infor-
mation, refer to the chapter "Switching the plug-on transmitter
on/off" on page 8.
Using the ON/OFF button, you can also activate/deactivate the RF
signal during operation. To do so, briefly press the
and proceed as described on page 8.

Selecting a standard display

Press the UP button (
standard display:
Contents of the display Selectable standard display
"Frequency/Name"
533.875 MHz
ew100 G3
P
MUTE
AF
"Channel/Frequency"
B.Ch: 20.12
533.875 MHz
P
MUTE
AF
"Name/Channel"
ew100 G3
B.Ch: 20.12
P
MUTE
AF
10
MHz
"MUTE" is displayed
"MUTE" is not displayed
Transmission icon is not
displayed, "MUTE" is displayed
Transmission icon is displayed,
"MUTE" is not displayed
ON/OFF button
)/DOWN button ( ) to select a