Table of Contents
Advertisement
Using the plug-on transmitter
The current state of the muting function or the RF signal
is displayed on the display panel of the plug-on trans-
mitter:
543.850
MHz
ew300 G3
P
MUTE
AF
State
Audio signal and RF signal
are activated (muting is
canceled)
Audio signal is muted
RF signal is deactivated
You can also deactivate the RF signal on switch-on.
For more information, refer to the chapter
"Switching the plug-on transmitter on/off" on
page 10.
Using the
deactivate the RF signal during operation. To do so,
briefly press the
described on page 10.
Selecting a standard display
Press the UP or DOWN button to select a stan-
dard display:
Contents of the display Selectable standard display
543.850
MHz
ew300 G3
P
MUTE
AF
B.Ch: 19.24
543.850
MHz
P
MUTE
AF
ew300 G3
B.Ch: 19.24
P
MUTE
AF
Transmitter's display
panel
"MUTE"
displayed, transmission
icon
"MUTE"
transmission icon
displayed
"MUTE"
transmission icon
not displayed
ON/OFF
button, you can also activate/
ON/OFF
"Frequency/Name"
"Channel/Frequency"
"Name/Channel"
7
is not
4
is displayed
7
is displayed,
7
is displayed,
button and proceed as
SKP 300 G3
4
is
4
is
| 13
Advertisement
Table of Contents
