Table of Contents
Advertisement
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the
Lock" menu item (see page 14). If the lock mode is activated, you have
to temporarily deactivate it In order to be able to operate the plug-on
transmitter:
Press the
ON/OFF
button.
ON/OFF
"Locked" appears on the display panel.
Press the
UP
button (
"Unlock?" appears on the display panel.
Press the
SET
button.
SET
The lock mode is temporarily deactivated.
How you are using the plug-on transmitter determines how
long the lock mode remains deactivated:
When you are in the operating menu
The lock mode remains deactivated until you exit the
operating menu.
When one of the standard displays is shown
The lock mode is automatically activated after 10 seconds.
The lock mode icon
flashes prior to the lock mode being activated again.
533.875
ew100 G3
P
MUTE
AF
Muting the audio signal or deactivating the RF signal
¾
The
MUTE
switch
allows you to mute the audio signal or to deactivate
the RF signal. Via the
"Mute
Mode" menu item, you can set the desired
¾
function of the
MUTE
switch
(see page 15).
Slide the MUTE switch ¾ ...
Setting
"AF
On/Off"
... to the left (position MUTE) Mutes the audio signal
... to the right
"RF
On/Off"
... to the left (position MUTE) Deactivates the RF signal
... to the right
"Disabled"
No function
From the
"Mute
Mode" menu item, select the desired setting (see
page 15).
Exit the operating menu.
¾
Slide the
MUTE
switch
to the left, to the position MUTE.
The plug-on transmitter reacts as indicated in the table.
Using the plug-on transmitter
"Auto
).
MHz
¾
Function
Unmutes the audio signal
(offline operation)
Activates the RF signal
(online operation)
9
Advertisement
Table of Contents
