Page 1
FUNCTION SETTINGS KITCHEN SCALE MODEL: RKS 1. Press [ON/OFF/ZERO] to turn the power on,the scale return to the weighing mode. 2. Press and hold [UNIT] then the display will show A-ON or A-OFF, press [ON/OFF/ZERO] key to select on or off (ON means auto power off function INSTRUCTION MANUAL activated, OFF means auto power off function inactivated).
SAFETY PRECAUTIONS SPECIFICATIONS All safety messages are identified by the following the words "WARNING" Model number Capacity Division and "CAUTION". These words mean the following: RKS-3000 3000g 0.5g RKS-6000 6000g Important information to alert you to a situation RKS-10000 10000g △...
Page 3
CALIBRATION DESCRIPTION BACK Note: Calibration is done in factory. Don't re-calibrate the Scale, unless it is not accurate. AC adaptor Socket How to calibrate 1. Before entering calibration mode, press [ON/OFF/ZERO] to turn the Weighing platform power on for warming up about 1 minute. 2.
Page 4
PREPARATION WEIGHING 1.Installing batteries/Connecting the AC adaptor Before weighing Whenever possible, please allow the balance to warm up for 10 minutes Batteries after first turning to power on, so that the balance will function properly and Battery Remove the battery compartment accurately.
Need help?
Do you have a question about the RKS-3000 and is the answer not in the manual?
Questions and answers