Related Manuals for LW MEASUREMENTS TREE LBS Series
Summary of Contents for LW MEASUREMENTS TREE LBS Series
- Page 1 Professional Weighing Equipment LBS Series Bench Scales Intelligent Weighing Scale HIGH RESOLUTION BALANCE WITH COUNTING FUNCTION Large Bench Scale Operation Manual...
-
Page 2: Table Of Contents
Table of Contents Section Page Declaration of Conformity Customer Service Introduction Safety Weight Scale Functions Features Application & Conformity RS232 Getting Started Delivery 12-13 Assembly & Installation 14-15 Program Options Parameter Settings Calibration Maintenance & Service Transportation & Storage Warranty Rev.4 01.23.2023... -
Page 3: Declaration Of Conformity
USA Model LBS 300 LBS 500 LBS 1000 Mark applied EU Directive Standards 2004/108/EC EN 61326-1: 2006 Signature: Boon Lim, R & D Manager Date: 14. 11. 2012 LW Measurements LLC, 620 Carlson Court, Rohnert Park, CA 94928 Rev.4 01.23.2023... -
Page 4: Customer Service
Customer Service LW Measurements, LLC 620 Carlson Court Rohnert Park, CA 94928 Tel: (707) 542-2185 FAX: (707) 542-3285 http://lwmeasurements.com Introduction What you should know about these Operating Instructions: Tree® Professional Weighing Equipment products are simple to operate. Nevertheless, you should read through these operating instructions in their entirety, so that you can make optimum use of the full potential and the diverse possibilities of the weighing scale in your daily work. -
Page 5: Safety
Safety Representations and symbols Important instructions, which involve safety, are highlighted with the appropriate mark: Safety recommendations When using the weighing equipment in surroundings with increased safety requirements, the corresponding regulations must be observed. The weighing scale may only be used with the power adapter supplied. Before connecting the power adapter to the scale, the user must ensure that the operating voltage stated on the power adapter is compliant with the mains voltage. -
Page 6: Weight Scale
Weight Scale The weighing scale consists of certain parts; The weighing scale consists of the following parts; The indicator (1) The rectangular metal support tube (2) The platform and base unit (3) The adapter (4) Operating manual Rev.4 01.23.2023... -
Page 7: Functions
Functions The LBS Series are high-quality electronic precision weighing scales with counting function and the following specifications Model number Capacity Graduation Weighing pan Size LBS 300 300 lbs 18 x 24 in 0.02 lb 0.05 lb 18 x 24 in LBS 500 500 lbs 24 x 24 in... -
Page 8: Features
Features Auto back light (selectable) Auto shut off (selectable) Hold function Animal weighing mode Peak hold function RS232 Auto calibration (AnyCal Software) Selectable calibration unit lb or kg Three modes: Normal/Setting/Internal Auto calibration ... -
Page 9: Application & Conformity
Application & Conformity The Following are instructions of how to correctly use the weight scale: The weighing scale may only be used for the weighing of solid-materials and of liquids filled into secure containers. The maximum capacity load of the weighing scale must never be exceeded, otherwise the weighing scale may be damaged. -
Page 10: Rs232
RS232 Data interface Connector: DB9 BALANCE Transmissions Settings Mode: Simplex Asynchronous Serial Baud Rate: 9600 Data Bit: 8 Parity Bit: None Stop Bit: 1 Data Format: ASCII 3. Transmission Information Format： 20 Byte ，blank=20H 4~13 14~18 ‘W: ’ DATA UNIT Start of Data Transmission=57H+3AH Polarity ‘+’... -
Page 11: Getting Started
Getting started The scale is packaged in an environmentally-friendly carton, which provides optimum protection for the balance during transportation. We suggest that you keep the original packaging in order to avoid damage if you are shipping or transporting the scale to a different location. It is also the best way to keep it in the best conditions if it will not be used for an extended period of time. -
Page 12: Assembly & Installation
Assembly & Installation The weighing scale is delivered in a partly dismantled condition. Assemble the individual components in the following sequence: Place your machine on a level, clean, and dry surface to obtain accurate readings. Fix the stainless steel column onto the base with four screws provided. ... - Page 13 Choice of a suitable location The environment in which your weighing scale is used is very important. Air movement, temperature changes, vibrations, direct sunlight, etc. all influence the performance of high precision weighing scales. Place your scale on a solid, sturdy surface that is free of air currents, vibrations and not in any direct sunlight.
-
Page 14: Program Options
Program options Please see our web-site at http://lwmeasurements.com for practical demonstrations of application usage. Interface Settings Press and hold the HOLD key, and then press ON-OFF key to turn on the weighing scale; display will show A-ON or A-OFF. ... - Page 15 Setting Power-on Mode Press and hold “HOLD” key, then press ON/OFF key to turn on the weighing machine, display will show “A ON” or “A OFF”, press UNIT key three times, display will show “J ON” or “J OFF”, press ZERO key to select “J ON”...
- Page 16 HOLD FUNCTION Press ON/OFF key to turn on the weighing machine, then place the item on the platform. Wait for the readings to become stable, press HOLD key, the “ ̥ “ indicator will show. Remove the item from the platform, the readings will still remain on the display.
-
Page 17: Calibration
Calibration Using an External Calibration Weight Note: Calibration is required when the weighing scale is initially installed or if the balance is moved to a substantial distance from the original location. The weighing machine should be allowed to warm up for 30 minutes before calibration. -
Page 18: Maintenance & Service
Maintenance & Service The weighing scale is a precision instrument, it must be treated carefully and cleaned regularly For maintenance-work, the balance must be disconnected from the power supply (remove power adapter plug from socket). Also ensure that the balance cannot be connected to the power supply during the work by a third party. -
Page 19: Warranty
(2) years from the date of shipment for Customers in the continental United States. LW Measurements will pay for freight both ways within the first 30 days of purchase if technical support is required. (Determined by our certified Technical Support Team) In the event technical support is needed the customer is responsible for shipping the product back to us after the 30 day period has expired.
Need help?
Do you have a question about the TREE LBS Series and is the answer not in the manual?
Questions and answers