Daikin FDMQ09RVJU Installation Manual page 17

For wired remote controller
1) Set to COOL or HEAT operation using the remote
controller.
2) Press and hold Cancel button for 4 seconds or longer.
Service settings menu is displayed.
3) Select Test Operation in the service settings menu, and
press Menu/OK button. Basic screen returns and "Test
Operation" is displayed at the bottom.
4) Press On/Off button within 10 seconds, and the test
operation starts.
Monitor the operation of the indoor unit for a minimum
of 10 minutes. During test operation, the indoor unit
will continue to cool/heat regardless of the temperature
setpoint and room temperature.
• In the case of above-mentioned procedures 3) and 4)
in reverse order, test operation can start as well.
5) Press and hold Cancel button for 4 seconds or longer in
the basic screen.
Service settings menu is displayed.
6) Select Test Operation in the service settings menu, and
press Menu/OK button. Basic screen returns and normal
operation is conducted.
• Test operation will stop automatically after 15-30
minutes. To stop the operation, press On/Off button.
English
Basic screen
1)
2)
Cool
Set to
68
Cool
F
Press and hold Cancel
button for 4 seconds or
Return Clean the filter
longer during backlight lit.
Service Settings
menu screen
3)
Service Settings 1/3
Test Operation
Maintenance Contact
Field Settings
Press Menu/OK button.
Energy Saving Options
Prohibit Buttons
Min Setpoints Differential
Setting
4)
Cool
Set temperature
80
Press On/Off button
°F
(within 10 seconds).
Test Operation
5)
Cool
Set temperature
80
Press and hold Cancel
°F
button for 4 seconds or
Test Operation
longer during backlight lit.
6)
Service Settings 1/3
Test Operation
Maintenance Contact
Field Settings
Press Menu/OK button.
Energy Saving Options
Prohibit Buttons
Min Setpoints Differential
Setting
Basic screen
16