Subscribe to Our Youtube Channel
Related Manuals for Eurotherm 2132
Summary of Contents for Eurotherm 2132
- Page 1 Operating Instructions Overtemperature Controller Eurotherm 2132 and 2116 ONTENTS section page Description Basic Operating Instructions Audible Alarm Navigation Diagram See also the main manual for the furnace, oven or other product to which the controller is fitted. MC03 – 1.05...
- Page 2 To operate the 2132/2116 there must be power to the furnace or oven, and the Instrument switch must be on. If a time switch is included in the furnace or oven circuit, this must be in an On period.
- Page 3 2132/2116 Overtemperature Controller Basic Operation Use Down and Up to alter the overtemperature setpoint. This should normally be set a little above the maximum working temperature (say 15°C above). The unit is supplied at 15°C above the furnace or oven maximum working temperature.
- Page 4 Telephone: +44 (0)1433 624242 Fax: +44 (0)1433 624243 Email: ServiceUK@carbolite-gero.com Carbolite Gero Limited, Parsons Lane, Hope, Hope Valley, S33 6RB, England. Telephone: +44 (0)1433 620011 Fax: +44 (0)1433 621198 E-mail: info@carbolite-gero.com MC03 – 1.05 01/01/16 2132 Copyright © 2016 Carbolite Gero Limited...
Need help?
Do you have a question about the 2132 and is the answer not in the manual?
Questions and answers