Table of Contents
Advertisement
Chapter 2 - Installation
High gain GPS Antenna
»
»
»
»
»
»
NOTE
The lightning arrestors supplied within the GPS kit are not included in the warranty cover provided
for the GPS unit.
Additional lightning arrestors can be ordered separately.
2.2.3
Installing the GPS
To install the basic GPS antenna:
1
Place the bracket on a flat surface and thread the GPS antenna through the
hole at the top of the bracket. Hand-tighten the fastening nut.
2
Assemble the lightning arrestor on the bracket, with the screws facing the
bracket. Connect one end of the 0.5 m cable to the lightning arrestor and the
other end to the GPS antenna.
3
Connect one end of the GPS 3m cable to the lightning arrestor, and the other
end to the GPS ANT connector on the BTS.
BreezeMAX Extreme
High gain antenna
25m cable
Pole mount bracket
Two metal bands
Carriage mounting bracket
Two Lightning Arrestors with 0.5m cables, including screws, washers, and
spring washers (2 x UNC10-32)
39
GPS Installation
System Manual
Advertisement
Table of Contents
