Table of Contents
Advertisement
Chapter 4 - Operation and Administration
A list of frequencies for the DFS algorithm. Applicable only for units operating in
the 5 GHz bands using a Band Name where DFS is supported. For details refer to
"Usable Frequencies" on page
4.7.2
Select
Use this option to select the viewing and configuration mode for a specific Sector.
The following options are available for the selected Sector:
4.7.2.1
Show
Select this option to view the relevant parameters. The displayed information is
the same as described in
4.7.2.2
Configuration
The Configuration menu includes the following options:
General Parameters
DFS
4.7.2.2.1
General Parameters
The General Parameters menu enables configuration of the following parameters:
4.7.2.2.1.1
Sector Name
An optional descriptive parameter. A string of up to 32 printable characters.
The default is null.
4.7.2.2.1.2
Sector Location
An optional descriptive parameter. A string of up to 64 printable characters.
The default is null (an empty string).
4.7.2.2.1.3
Sector Heading (degrees)
A descriptive parameter indicating the sector's heading in degrees. A number from
0 to 359.
The default is 0.
4.7.2.2.1.4
Bandwidth
The bandwidth of the sector in MHz.
In the current release the supported options are 5* MHz and 10 MHz.
The default Bandwidth is 10 MHz.
BreezeMAX Extreme
132.
Show Summary (Section
124
Sector Menu
4.7.1) above.
System Manual
Advertisement
Table of Contents
