Removing The Shipment Tape; Attaching The Control Panel Overlay (If Necessary) - Colortac SmartLF Ci 24E Installation & Operating Manual

1.4 Removing the shipment tape

1.5 Attaching the Control Panel Overlay (if necessary)

Where a Multi-Language Overlay pack has been supplied please select the appropriate overlay for your country.
Follow these numbered steps to affix the overlay to the scanner.
PAS171
Colortrac SmartLF Ci 24 / Ci 40 Installation and Operating Manual
The scanner is protected during shipment by two strips of self
PULL RED TAB
adhesive tape which must be removed before proceeding with the
installation.
Remove the shipment tapes by locating the red tab and carefully lifting
the tape up and away from the scanner.
The scanner is normally delivered
with a Control Panel Overlay in the
language of the intended country of
installation.
2
Remove both tapes completely. The tapes
cannot be reused and should be disposed of.
3
P/N: P005500 Colortrac Ltd © 2010
7
1
4