Setting The Scanner Color Modes - Colortac SmartLF Ci 24E Installation & Operating Manual

required function is selected SmartLF Ci begins to scan the document loaded in the
scanner or waits for the document to be loaded. SmartLF Ci will display the animated
icon showing a document being loaded into the scanner.
PRESSING THE RUNNING FUNCTION ARROW ICON STOPS SMARTLF CI
SmartLF Ci can also be controlled from the scanner‟s control panel by pressing the
corresponding panel buttons. These will only operate the SmartLF software if they
have been correctly configured through the Windows Scanners and Cameras icon that
is located in the Windows Control Panel. Refer to Section 3.04.

3.07 Setting the scanner color modes

COLOR
The color mode allows control
of the number of colors and
the brightness of the file, copy
or emailed document image
PAS171
Colortrac SmartLF Ci 24 / Ci 40 Installation and Operating Manual
FILE / SCAN
GRAYSCALE
The greyscale mode allows
control of the brightness of the
file, copy or emailed document
image
ARROW MEANS
WAITING FOR A
DOCUMENT TO BE
LOADED
COPY
BLACK AND WHITE
The black and white mode allows
control of the type and degree of
thresholding of the file, copy or emailed
document image
SPEED CONTROL
SmartLF Ci can be slowed down
if necessary by using the Quality
slider found by clicking the i
button at the top left corner of the
SmartLF interface.
CopySmart and ScanWorks have
similar controls.
P/N: P005500 Colortrac Ltd © 2010
19