Remote Control Of The Scanner Using Windows Xp; Making Your First Scan With Smartlf All-In-One Sw; The Smartlf All-In-One 'Scan-To' Functions - Colortac SmartLF Ci 24E Installation & Operating Manual

18

3.04 Remote control of the scanner using Windows XP

The XP Windows Image Acquisition Device Driver Interface (WIADDI) supports custom scanner interfaces allowing
SmartLF Ci hardware to start key program operations. The SmartLF Ci scanner SCAN and COPY buttons can be
used to start and stop these primary software functions from the scanner control panel instead of, or in conjunction with
the software. They operate with the standard SmartLF, ScanWorks and CopySmart software but only with the
Windows operating system. To set up the panel buttons go to the Windows Control Panel and set the properties for
„Scanners and Cameras‟ as below.
CONTROL PANEL
IMPORTANT: TO REMOTELY CONTROL THE SMARTLF ALL-IN-ONE SOFTWARE FROM THE SCANNER THE
RELEVANT BUTTON MUST BE PRESSED FOR AT LEAST 0.5 SECONDS

3.05 Making your first scan with SmartLF All-In-One sw

(Until a document is scanned and displayed in the preview window, no zoom and crop tools are visible)

3.06 The SmartLF All-In-One 'SCAN-TO' functions

FILE -
SmartLF Ci scanning to file is started by pressing the diskette icon in the File button. First select the Browse button to
choose the storage location for the new file.
COPY - To have
SmartLF Ci scan to the Windows printer press the printer icon in the Copy button. First select the target
Windows printer where the copy will be printed first using the I-button.
EMAIL - To have
SmartLF Ci scan to e-mail press the envelope in the Email button. This requires a configured email client to be
set up e.g. Outlook Express.
NOTE: For fragile originals SmartLF Ci can be slowed down using the Quality slider
accessed from the i-box in the top left corner of the SmartLF interface. As soon as the
PAS171
Colortrac SmartLF Ci 24 / Ci 40 Installation and Operating Manual
SmartLF Ci is designed to make scanning-to-file,
scanning-to-copy and scanning-to-email extremely
simple to achieve.
Note that Colortrac recommend the emailing function
be used for black and white TIFG4 technical drawings
or small, low detail color scans only.
Load a document into SmartLF Ci NOW
SCAN=FILE
P/N: P005500 Colortrac Ltd © 2010