Colortac SmartLF Ci 24E Installation & Operating Manual page 2

PLEASE READ
DO NOT ALLOW PAPER CLIPS, STAPLES OR OTHER
UNSUITABLE MATERIALS TO ENTER THE SCANNER AS
THIS MAY DAMAGE THE OPTICAL SYSTEM
ALWAYS USE THE SOFTWARE SCANNER SPEED
CONTROL TO AVOID STOP/START SCANNING IF IT
APPEARS THE COMPUTER CANNOT KEEP UP WITH THE
SCANNER. THIS WILL MAXIMISE IMAGE QUALITY (p.18)
FOR DOCUMENTS THICKER THAN THE STITCH TARGET
USE THE PAPER WEIGHT CONTROL (p.25)
TO COMPLY WITH ENERGY SAVING, LEFT UNNATTENDED
THIS SCANNER WILL ENTER SLEEP MODE AFTER 15
MINUTES. IT CANNOT BE DISABLED (p.25)
WHEN LOADING ANY MEDIA INTO THE SCANNER
ENSURE THE DOCUMENT IS KEPT INSIDE THE THIN
LINES EITHER SIDE OF THE RULED AREA. FAILURE TO
DO SO WILL RESULT IN MEDIA JAM AND POSSIBLE
DAMAGE TO THE ORIGINAL (p.14)