Ubee EVW32C Subscriber User Manual page 68

Ubee Interactive
Label
Trigger Start Port
Trigger End Port
Target Start Port
Target End Port
Protocol
Description
Enabled
Apply
Remove All
3. Click Apply. The triggering rule is created and displayed in the table as shown below.
Additional field descriptions follow.
The following example shows the Port Triggering option set up for a dual Xbox
configuration.
Ubee EVW32C Advanced Wireless Voice Gateway Subscriber User Manual • March 2017
Allows you to enter a port number or the starting port number in a range of port numbers.
Allows you to enter a port number or the ending port number in a range of port numbers.
Allows you to enter a port number or the starting port number in a range of port numbers.
Allows you to enter a port number or the ending port number in a range of port numbers.
Allows you to enter the protocol type for this rule: UDP, TCP, or BOTH.
Allows you to enter a name for the triggering rule.
Disables (Off) or enables (On) the triggering rule.
Saves changes.
Deletes all entries in the forwarding table.
Description
Using the Advanced Option
63