Ubee EVW32C Subscriber User Manual page 62

Ubee Interactive
Label
Local IP
Local Start Port
Local End Port
External IP
External Start Port
External End Port
Protocol
Description
Enabled
Cancel
Apply
Port Map
Forwarding Table – Lists existing forwarding rules.
Remove All
3. Click Apply. The forwarding rule is created and displayed in the table as shown
below. Additional field descriptions follow.
Ubee EVW32C Advanced Wireless Voice Gateway Subscriber User Manual • March 2017
Defines the IP address of the local LAN device to which the forwarding rule applies. For
example, an Xbox or PC.
Defines the starting port number listened to by the server host located in your LAN.
Defines the ending port number listened to by the server host located in your LAN.
Designates another router's IP address on the network through which to forward data.
Defines the port number to start the range of ports to publish to the Internet.
Defines the port number to end the range of ports published to Internet.
Note: Be very careful with ranges. Ports within a range are not usable by other applications
that may require them. It is common and safer to enter the same port number as the start
and end of the range.
Selects the protocol type. Options are UDP, TCP, or BOTH.
Specifies the forwarding rule name.
Disables (Off) or enables (On) the forwarding rule.
Stops the forwarding rule creation process and returns you to the previous Forwarding
screen.
Saves changes.
Shows a list of common applications and their ports.
Deletes all entries in the forwarding table.
Description
Using the Advanced Option
57