Advertisement
(2) About sub-mode
(j»roduct information
II
Mode
II
II
Operation
II
II
Display
II
IQ)Model name and
speech language
3 18
'
"3781"
or
"3751"
is
displayed. "JPn" or
r .......
E
...i-n
" ""'"-_
g
~·Eng. is displayed.
display
!
Preparation date
display (Note)
!
3
ersion display
(Note)
!
Time button
Time button
Time button
2 0 0 1
"200703. 13"
is
displayed. (March
13,
~~~~"""'"--3~2007)
or fen is
O 3
'
operated.
•
U E
"VEr
1.19"
is
r
displayed.
f---....
":-I.-"" ..
,=-'-g=l (Version
1. 19)
"Model name can be changed by pressing the· ... ·or
"T"
button during
CD
the model name and speech
language display.
"Speech language can be changed by pressing the ·SET/CONFIRM" button and the" ... ·or "T" button
during
CD
the model name and speech language display. When the "SET/CONFIRM" buttons are
pressed again. the model name can be changed ...
"When the ·START" button is pressed while pressing the ·SET/CONFIRM" button, the content of the
change is written in non-volatile memory.
"When the "TIME· button is pressed, the mode changes in the order
CD-+®-+@-+CD"".
"When the "OBJECT TEMp· button is pressed during the product information display, all the LEOs are
light up.
«Note»
®
Preparation date and
@
Version display are altered depending on the specification charge.
~actory
setting
"When the "START" button is pressed while pressing the "SET/CONFIRM" button, the alarm sound ·Beep
Beep Beep" is issued, and the setting is defaulted to the factory setting. When the "START" button is
pressed again while pnessing "SET/CONFIRM" button, the setting is defaulted to factory setting.
The following items ane subject to the factory setting:
(1 )Setting values for each cycle (sterilization temperature, sterilization time, etc.)
(2)Error information and frequency
(3)processing fnequency
(4)Boiling point and air purge settings
(S)Address
(6)CH display fnequency
- 24-
Advertisement
