Hdmi Service Mode - Pioneer DVR-LX61D Service Manual

1

6.7 HDMI SERVICE MODE

[Purposes]
A
To check the statuses of the connected
HDMI devices.
[How to enter] • Press the ESC , DISP then +10 , +10 , 4 keys, in that order.
Note: Do not press any key on the remote control unit supplied with the unit or for servicing
B
[How to quit]
Press the ESC key.
[Description of the mode]
1. HDMI MAIN information screen (First screen)
[HDMI]
00
Connect:*** Reso :*********
01
DevType:**** Color:**********
02
03 TMDS :*** HDCP :** : **
[Video Check]
C
Pic_Asp
Active_Asp :
[Copyright Control Check]
ACP_Type:
ChSts0: ChSts1: (C: , L: )
[Digital Tuner]
HDMI Out: AC3 32kHz
LL SPDIF: AC3 32kHz DAC: 32kHz
Table 1: Description of the items on the HDMI main information screen
Line
1
D
2
3
Table 2: Connection status of the HDMI device
E
Table 3: Output resolution
F
68
1
2
while the HDMI debug screen is displayed.
1/6
Audio:***
APath:*****
Fs :***
SType:
:
(Actual send: )
Item Description
Connect Connection status of the HDMI device
Reso Output resolution
Audio HDMI audio output status
DevType Type of connected device
Color Output color
TMDS TMDS (video stream) signal output status See Table 7.
HDCP HDCP Authentication status
Fs Output audio Fs
Indication Description
ON Connected
HtPlg Not connected but Hot plug is ON.
OFF Not connected
Indication Description
480i NTSC 720x480i NTSC
480p NTSC 720x480p NTSC
720p NTSC 1280x720p NTSC
1080i NTSC 1920x1080i NTSC
1080p NTSC 1920x1080p NTSC
576i PAL 720x576i PAL
576p PAL 720x576p PAL
720p PAL 1280x720p PAL
1080i PAL 1920x1080i PAL
1080p PAL 1920x1080p PAL
---------- TMDS Off
2
3
[Tool to be used]
Remote control unit for servicing
(*1) [Tips]
Because all the data on connection and authenti-
-cation are canceled once the function of the
connected HDMI device is set to a position other
than HDMI, all the debugging data in Table 1 are
deleted.
Remark
See Table 2.
See Table 3.
See Table 4.
See Table 5.
See Table 6.
See Table 8.
See Table 9.
DVR-LX61D
3
4
• HDMI device
(GGF1381)
• HDMI cable
4