Pioneer DVR-LX61D Service Manual page 94

1
[1] Input Flow of the ID No. and ID Data When Exchanging HDD or MAIN Assy
A
• When exchanging HDD or MAIN
Assy, or both exchanged
B
When displayed following message at
Power on
FL Tube : [E01]
CRT display :
An error occured. Please consult
the service center. Note that
contents on the HDD may be
erased when servicing this unit.
C
New HDD/when
D
there is error
on recorded contents
When displayed following message at
Power on
FL Tube : [E02]
CRT display :
HDD information is not correct.
Execute HDD Initialize from
the Disc Setup menu.
*Use Remote Control of
the unit
E
Execute
HOME MENU Setup
HDD Initialize HDD
Disc Setup
Basic Initialize HDD
Initialize
Finalize
Initialize HDD
F
After OSD displaying "Finished" after initilaization, reboot.
94
1
2
Deletion of the CPRM ID No.(when ID No. is registered.)
Input of the CPRM ID No. and ID data
Normal operation mode
Exchanging to the original HDD(when
there is no error on
the recorded
contents.)
[CAUTION]
All recorded data are deleted if the HDD is intialized.
Take care that restoration of the user's data recorded on the HDD is totally
impossible.
Before servicing, OBTAIN THE USER'S PRIOR CONSENT to that effect.
Disc Setup Intialize
Start
*Goes to normal operation
with no caution
Start
2
3
Power ON
Confirmation of the CPRM ID No.
Power OFF ON
End
DVR-LX61D
3
4
When displayed "CPRM ERR"
When displayed following message at
Power on
FL Tube : [CPRM ERR]
CRT display :
CPRM information is not correct.
End
4