Service Mode - Pioneer DVR-7000 Service Manual

DVR-7000

3.1.4 SERVICE MODE

1. Error Rate Measurement
How to Enter this Mode : Press the [ESC] and [SIDE-B] buttons sequentially.
Functions : When enter this mode, measure the error rate automatically.
1
VR mode record
Record it for 10 seconds and playback the title.
During the playback and stop, display the error rate in FL and OSD.
ERR RATE : *.**E-*
2
Video mode record
Record it for 30 seconds and playback the title.
During the playback and stop, display the error rate in FL and OSD.
ER (av):*.*E-* * (Display - during measurements)
3
DVD-VIDEO playback
Playback, and measure the error rate and display it. Stop afterwards.
ER (av):*.*e-* * (Display - during measurements)
4
CD
Trace it from the lead of track 1 and display the error rate.
E. RATE:*.*e-*
How to Release : Press the [ESC] button to release from this mode.
2. Error Rate Measurement During DVD-VIDEO Playback
How to Enter this Mode : Press the [ESC] and [n] buttons sequentially during playback. (n: Numeric button)
Functions : When enter this mode, measure the error rate of DVD-VIDEO and display it.
Record it for 10 seconds and playback the title.
ER (av):*.*e-* * (Display - during measurements)
How to Release: Press the [ESC] button to release from this mode.
3. VR Aging Mode
How to Enter this Mode : Press the [ESC] and [REP.B] buttons sequentially to enter the aging mode.
Display [AGING] on the left part of FL and display loop count on the right part of FL during this mode.
Functions : When enter this mode, repeat the following operations automatically.
1
VR initialization
2
Video recording 60 minutes
3
Playback 45 minutes
4
Tray open
5
Tray close
Display the following counts in FL during the aging mode.
[ AGING 0001 ]
How to Release : Press the [ESC] button to release from this mode.
Note : Aging Mode stops when an error occurs. Press the [ESC] button to release from this mode.
And see the error history with Debugging Mode.
4. Version Display
How to Enter this Mode : Press the [ESC] and [FRM/TIM] buttons sequentially to display the version information screen.
How to Release : Press the [ESC] button to release from this mode. (screen disappears)
5. Version Display (for Remote Control Unit of Accessory)
How to Enter this Mode : Perform highlight display the position of "main unit setting / voice output / digital output / ON", and
press the [ANGLE] button of the remote control unit of accessory.
The following display appears at a position of the third layer.
S Y S C O N : RELEASE_1 1 2
T U F L C O N : 1 . 5 2 0 0
D R I V E : 1. 6 1 C
D E V I C E : AV1=ES6 . 0
6. FL All Lighting Mode
How to Enter this Mode : All FL lights when pressing the [ESC] and [TEST] buttons sequentially.
How to Release : Press the [ESC] button to release from this mode. (Return to normal display.)
Note : Take care not to light all FL Tube for long time.
*
*
17