Pioneer DVR-LX61D Service Manual page 103

5
• Indication when the maximum number (12) of channels have individual settings
[Tips]
If a channel that does not have specific settings is currently selected, the indication will be as shown below,
and individual data items cannot be set for that channel. To set individual data items for the currently selected
channel, you must clear any specific-channel settings for one or more channels.
Specific Area Mode
Input - [ TUNER ]
Sync AGC
H Threshold Level : 12
V Threshold Level : 10
EPG EQ
Individual setting state
Sorry !
You can store only 12 channels
for Specific Area mode.
[2] General Setting Mode
[How to enter this mode]
• To shift from Specific-Channel Setting mode:
Each time the DIG/ANA key is pressed, Specific-Channel Setting mode and General Setting mode
are alternately selected.
• To shift from Normal mode (recording/playback stop):
Press the ESC then CHP/TIM keys.
[How to exit]
Press the ESC key to return the normal mode.
[Setting examples]
Show setting example on the General Setting mode screen to the following.
Regarding setting of actual each item, refer to table 1 (key operations in specific-area setting mode).
Specific Area Mode
Input - [ TUNER ]
Sync AGC
H ThresholdLevel
V Threshold Level : 10
EPG EQ
*: Setting is the default.
• General Setting mode can be entered only during recording/playback stop.
[Tips]
• The currently selected input mode (TUNER or LINE) is displayed for "Input."
• If L1, L2, L3, or DV is selected for input, general settings for the line input can be made (DV is not valid for
specific-area settings), and if TUNER is selected, general settings for the tuner input can be made.
5
6
: ON *
*
*
: OFF *
[General Setting mode screen]
: ON
: 12
: OFF
6
7
[H Threshold Level]
The slice level setting for the horizontal(H)-sync separation circuit can
be changed. By your changing the slice level, horizontal sync
disturbance may be ameliorated. Set the slice level to a value with
which the least sync disturbance is seen.
[V Threshold Level]
The slice level setting for the vertical(V)-sync separation circuit can be
changed. By your changing the slice level, vertical sync disturbance
may be ameliorated. Set the slice level to a value with which the least
sync disturbance is seen.
[Receiver sensitivity setting for an electronic program guide (EPG)]
The sensitivity when receiving an electronic program guide can be
selected. Set the sensitivity to "High" only if reception is unstable.
[Display in General Setting mode when the channel
currently displayed has specific settings]
Specific Area Mode
Input - [ TUNER ]
* Sync AGC
* H ThresholdLevel : 12
* V Threshold Level : 10
* EPG EQ
This channel is set up
individually.
DVR-LX61D
7
8
: ON *
*
*
: OFF *
8
A
B
C
D
E
F
103