Pioneer DVR-LX61D Service Manual page 78

1
5
Execute the HDD R/W Check.
Before executing this test, be sure to obtain your client's consent for erasure of HDD data.
A
Press the "4" key while the menu screen is displayed then the "SKIP p" key to start the HDD R/W Check.
NOTE
Be sure to press the "SKIP o" key to complete this test after the progress reaches 100% or cancel this test (OFF) while
it's in progress.
Do not press "ESC" key without pressing "SKIP o" key, otherwise this test is not completed and it causes unexpected
errors on the HDD.
B
C
D
Diagnosis results
• If no error occurs in any of the Write/Read/Compare items, the HDD is in normal condition and is not required to
be replaced. A block other than the HDD is in failure.
• If any error occurs, the HDD must be replaced.
When the status is OFF
E
To terminate the diagnostic program, press the "ESC" key.
When the status is ON
The status becomes OFF when the test is interrupted by pressing the "SKIP o" key or when "Progress" reaches 100%.
F
78
1
2
The display on the left indicates the progress of the test.
The percentage of the test progress is displayed on the screen,
and the test is finished when the percentage reaches 100%.
Detailed description on each item on the screen
• Write Error: Number of write errors
• Read Error: Number of read errors
• Compare Error: Number of comparison errors
• Current LBA: The address during testing
• Max LBA: Highest address number of the HDD
• Progress: Percentage of test progress (%)
• Remain Time: Estimated time required for finishing the test
across all sectors.
Estimated time: 15 hours/500 GB
DVR-LX61D
2
3
8 hours/250 GB
3
4
4