Gracenote Database Update Method - Pioneer DVR-LX61D Service Manual

1

8.5 GRACENOTE DATABASE UPDATE METHOD

[Purposes]
A
1. Gracenote DB should be stored in build-in HDD to search for audio CD titles.
After replacing the HDD, it is necessary to download the Gracenote DB.
2. While the GUI screen is not displayed, press the ESC then DISP keys.
When "NOBKUP" was displayed on the first screen (version information, etc.), update the latest Gracenote
Database (GNDB) information.
3. Rewriting the database to the latest version may ameliorate the symptoms claimed by the customer.
(Confirm that the GNDB B and GNDB U are latest version.)
[1] Disc Update
B
[Tools to be used]
Remote control unit
for servicing
(GGF1381)
C
[Procedure]
Open a disc tray by pressing the "OPEN/CLOSE" button.
Put the update disc on the tray. Press a " OPEN/CLOSE " button while pressing a "Record Stop"
button on the frontpanel.
* The disc tray closes automatically and the disc is loaded.
FL display
D
D I
D O
*After update is completed, the disc tray opens automatically.
E
At this time, "DOWNLOAD-1" or "CLOCK" is displayed on the FL display.
*It takes for about 15 minutes until update is completed.
Take out the Update Disc.
The power turns off. (An effective key is "STANDBY/ON" key.)
The power turns on and press a " ESC " button, then press " DISP " button on the remote control unit for
servicing.
Confirm a GNDB B and GNDB U version.
Press " ESC " button on the remote control unit for servicing in order to exit the test mode.
F
100
1
2
Gracenote DB
Update Disc
(Refer to Page 99.)
L O A D
S C D W L D
GNDB download
W N L O A D - 1
DVR-LX61D
2
3
[Notes]
Be sure NOT to turn off the unit during update.
If the unit is turned off during update, the GNDB programs may
not be properly rewritten, in which case the unit may not be able
to initialize itself normally when turned on again.
3
4
4