Tiller Operation - Honda FF 300 Owner's Manual

Front wheel position adjustment
Front wheel height can be changed to adjust the tilling depth and to
transport the tiller.
1. Set the tiller on a firm level ground and hold it securely by placing a
suitable block under the transmission case.
2. Pull the front wheel beam forward to move the pin out of the groove
and set it in the groove you want. Then, secure the pin in the
position.
When the ground is too soft and the tiller gets into the ground, or
when the ground is too hard, adjust the tilling depth in a shallow
position.
：
For transportation:
：
Tilling depth: Approx. 20 mm (0.8 in)
：
Tilling depth: Approx. 60 mm (2.4 in)
：
Tilling depth: Approx. 120 mm (4.8 in)
： Tilling depth: Approx. 160 mm (6.3 in)
6.

TILLER OPERATION

FRONT WHEEL BEAM
GROOVE
PIN
23