Honda FF 300 Owner's Manual page 28

Gear selection
Return the throttle lever to the low speed position and disengage the
clutch before moving the gearshift lever. Avoid using excessive force
on the gearshift lever.
Select a gear position in accordance with the contents of the Gear
Selection Table (page
Always operate the gearshift lever after the main clutch has been
disengaged.
If the gearshift lever is difficult to operate, squeeze the main clutch
once and then disengage the main clutch and operate the gearshift
lever again.
In reverse operation, be especially careful of your feet and observe
the following precautions:
Make sure there are no people or obstacles behind you.
−
Lower the engine speed.
−
Hold the handlebar with both hands and support it firmly.
−
Gently engage the clutch and make sure that it can be disengaged
−
at any time.
GEARSHIFT LEVER
).
28
27