Overview Of The Remote Control; Prepare; Connect; Prepare The Remote Control - Philips Fidelio SoundSphere User Manual

Overview of the remote
control
a a
b b
c c
d d
e e
a
• Turn on/off the unit.
b +/-
• Adjust volume.
c
/
• Skip to the previous/next track.
d AirPlay
• Select the AirPlay audio source.
e
• Mute or restore volume.
f
• Select the USB audio source (for
iPod/iPhone/iPad only).
g
• Select the MP3 link audio source.
10 EN
h
• Start or pause play.
h h
g g
f f

3 Prepare

Always follow the instructions in this chapter in
sequence.

Connect

Connect speaker cables
Note
•
For optimal sound, use the supplied speakers only.
•
The supplied DIN cable is only intended for use with
DS6800W. Never try to connect any other devices
through this cable.
• Connect the supplied DIN cable to the
CABLE IN sockets on both speakers.
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
•
Before you connect the AC adaptor, make sure that you
have completed all the other connections.
• Connect the AC power cord to
• the DC-IN socket on the back of the
main speaker.
• the wall power socket.
Turn DS6800W on
After proper power connection, the unit
switches on automatically.
• Wait for successful boot-up of the unit.
»
The boot-up takes about 35 seconds.
»
During boot-up, the Wi-Fi SETUP
indicator on the back of the main
speaker blinks green quickly.
»
After boot-up, if no Wi-Fi connection
has been set up for DS6800W, the
Wi-Fi SETUP indicator starts to blink
green slowly.
• To switch the unit to standby mode, press
.
• To switch the unit on from standby mode,
press again.

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
EN 11