Note
•
If the WI-FI SETUP indicator on DS6800W does not
stay green steadily, it means that the Wi-Fi connection
has failed. Please power off both your Wi-Fi router
and DS6800W and then power on them again to see
whether DS6800W can be connected to your home
Wi-Fi network. If the problem remains, try the above
procedures again.
•
After you finish the above changes or power-off and
power-on of DS6800W, the new Wi-Fi network
created by DS6800W will disappear.
Tip
•
If you like, you can change the name of your
DS6800W in AirPlay Device Name on the DS6800W
configuration web page. This is helpful when you have
multiple Philips AirPlay-enabled devices in your house
and you need to distinguish between them.
•
If you want to enter the network name (SSID) manually
(for example, if you want to hide your SSID), select
CONFIGURE MANUALLY from the pull-down list at
step 2 in the above.
20
EN
Restore your Wi-Fi enabled device
back to your existing home Wi-Fi
setting
Note
•
Make sure that the settings at steps 2 to 3 below match
your home Wi-Fi network settings you wrote on paper.
1
Select Settings -> Wi-Fi on your iPod
touch/iPhone/iPad.
•
Or open the list of available Wi-Fi
networks on your PC/Mac.
2
Select your network name (SSID) from the
list of available wireless networks.
3
Enter the network key if required.
4
Wait until successful Wi-Fi connection to
your home Wi-Fi network.
EN
21
Need help?
Do you have a question about the Fidelio SoundSphere and is the answer not in the manual?