Room Monitor; Handset Setup - Radio Shack 43-3704 Owner's Manual

Ô
NOTES
• You must have two
handsets to use Room
Monitor feature.
• This feature only works
when the handset is
within the range of the
base.
18
confirmation tone, and
Mode Complete
3. To return to normal mode, press the
CANCEL
key, or return the handset to the cradle.

Room Monitor

This feature allows you to monitor sounds in
Ô
another room. Place the handset in the
room you wish to monitor; it will function as
a microphone. A second handset can be set
to function as a remote speaker, allowing
you to monitor sounds in the room. Ô
Using Room Monitor
1. Press the
Room Monitor menu.
appears.
2. Select the handset you want to monitor
by using
3. Press the
Monitoring
sounds in the room where the handset
is installed.
4. To turn off the Room Monitor, press the
END

Handset Setup

The following submenu options must be set
separately for each handset.
Selecting a Telephone Line
TEL-LINE allows you to set default
telephone line. The line you select will be
used when you make a call. If you select
Auto, the phone will default to whichever
line is currently free.
1. Press the
Handset Setup menu, and then the Set
TEL-LINE submenu.
appears.
soft key and then the
soft key and select the
MENU
Listen to;
or
CID/VOL/
soft key.
OK
appears, and you hear
soft key, or .
END
soft key. Select the
MENU
DirectLink
soft
OK
.
REDIAL/P/