Remote Access With The Handset - Radio Shack 43-3704 Owner's Manual

Remote access with the handset

You can operate your answering system
from another room using a handset. Ô
1. Press the
CONF
handset. If you have a new message,
corresponding line icon (L1 or L2)
appears on the handset.
2. Press the
LINE1
Remote Answering Machine
operation
display.
The answering system announces the
current time and the number of
messages stored in the memory.
3. You hear "To play incoming messages,
press two. For help, press zero".
You will hear a beep.
4. Enter a command within 30 seconds.
You may select a command from the
following chart:
soft key on the
or soft key.
LINE2
appears on the handset
Ô Ô
NOTES
• If you press END before
the answering system
answers, the phone will
return to standby.
• When the answering
system does not answer
within 6 seconds, you
hear a beep and the
phone will return to
standby.
• When you receive a call,
the remote operation is
canceled.
• You can change the
handset volume during a
remote operation.
• During the remote
operation -- appears on
the base.
• If you have new
messages and old
messages, only the new
messages will be played.
After you have reviewed
your new messages, you
can play your old
messages by again
pressing !/2.
69