Room Monitor - Radio Shack 43-3570 Owner's Manual

Room Monitor

Using Room Monitor
1. Enter the Room Monitor menu (see
"Entering the Menu" on page 16).
To Room Monitor
2. Select the handset you want to monitor by
using
VOL/RING/
When monitoring, be sure the other
handset is facing up so the microphone
can pick up the sound clearly.
3. Press
SELECT/
RoomMonitor
sounds in the room where the handset
is installed.
Handset speaker is on the rear side.
Place the handset so the speaker is not
covered.
4. To finish the Room Monitor, press
or return the handset to the cradle.
Handset Setup
Programming your Voice Mail Access
Number
1. Enter the Handset Setup menu, and
then the Edit Voice Mail submenu (see
"Entering the Menu" on page 16).
V_mail No.
2. Enter your personal access number
using the number keypad (0-9),
, ,
TONE/< #/>
(up to 20 digits).
PAUSE
3. Press
SELECT/
confirmation tone.
To delete the current Voice Mail Access
Number, delete all numbers in step 2 using
and
MENU/DEL SELECT/
appears.
or
VOL/RING/
.
appears and you hear
appears.
, or
MENU/DEL REDIAL/
. You will hear a
.
.
END
Edit
/
17