Setting The Ring Time - Radio Shack 43-3704 Owner's Manual

Ô
NOTES
• To scroll through the
menu options,
repeatedly press
CLOCK/MENU on the
base in standby mode.
The system returns to
standby after the last
menu option.
• When you have
completed the setting,
"
press !PLAY/
to exit the menu mode,
or CLOCK/MENU to
move to the next menu
option.
58
8. Press
correct AM or PM setting.
The message counter displays
9. Press
A confirmation tone sounds, the day
and time you set are announced for
your review.
Setting a PIN code
Ô
To play your messages from a remote
location, you will need to enter a two-digit
Personal Identification Number (PIN) code.
To select a PIN code, perform the following
steps: Ô
1. Press
2. Press
PIN code appears on the base and it is
announced.
3. Press
STOP
number appears. Press and hold
to quickly scroll through the numbers
on the display.
4. Press
A confirmation tone sounds, the system
announces the new PIN code.

Setting the ring time

The ring time setting allows you to set the
number of rings the caller hears before your
answering system plays the outgoing
message. You can set the ring time to
answer after two, four, or six rings. Setting
"TS" (Toll Saver), the answering system
picks up after two rings if you have new
messages, and after four rings if there are
none. This way, if you make a long distance
SKIP/SELECT
until you hear the
REPEAT/SELECT
to select the AM/PM setting.
SET
or
L1 ANSWER
CLOCK/MENU
SKIP/SELECT
until the desired
REPEAT/SELECT
or
SKIP/SELECT
to select the PIN code.
SET
or
A or P .
.
L2 ANSWER
once. The current
or
REPEAT/SELECT