Hanging Up; Call Waiting; Placing A Call On Hold; Redialing A Call - Radio Shack 43-3704 Owner's Manual

Ô
NOTES

Call Waiting

You must subscribe through
your local telephone
company to receive Call
Waiting or Caller ID on call
waiting service.

Placing a Call on Hold

• You can place a call on
hold for 15 minutes.
When 15 minutes has
passed, the call is
disconnected, and the
phone returns to standby
mode.
• While a call is on hold,
CIDCW can not be
received.

Redialing a Call

• If the number exceeds
32 digits, only the first 32
digits are retained in
redial memory.
• If the redial memory is
empty, you will hear a
beep.
32
H
ANGING
From the handset, press
handset to the base.
From the handset speakerphone, press
or return the handset to the base.
END
Switching to the Handset
Speakerphone During a Call
To switch a normal call to the
speakerphone, press
handset. To switch from a speakerphone
call to a normal call, press
C
ALL
If you have Call Waiting service and a call
waiting tone sounds while you are on a call,
Ô
press
TALK/FLASH
the waiting call. There is a short pause, and
then you will hear the new caller. To return
to the original caller, press
the handset again. Ô
P
LACING A
1. During a call, press
handset. The line soft key (
LINE2
The call will be put on hold. Ô
If you leave a call on hold for more than
10 seconds, the display screen will
read Hold.
2. To talk to the caller, press
or
(LINE1 or LINE2). The phone will return
back to the call.
R
EDIALING A
The last three phone numbers dialed can be
quickly redialed from the handset. Redial
numbers stored in the handset are
independent from each other. Ô
U
P
SPEAKER
W
AITING
on the handset to accept
C
ALL ON
INTCM/HOLD
) to be placed on hold will flash.
, or the correspond soft key
SPEAKER
C
ALL
or return the
END
on the
.
SPEAKER
on
TALK/FLASH
H
OLD
on the
or
LINE1
TALK/FLASH